How to secure refrigeration controllers from the internet
The German Federal Office for Information Security (BSI) has warned of further vulnerabilities in Danfoss AK-SM800A controllers used in industrial cooling plants. The same question applies to every networked control device in a plant, shop or warehouse.

What the BSI says about the Danfoss controllers
On 13 November 2026 the BSI published a press release on the Danfoss controllers. It reports further vulnerabilities in the AK-SM 800A type, which is used in industrial refrigeration systems. Firmware versions up to at least 5.3.2 are affected.
The BSI advises that affected devices should not be connected to the internet. Where remote maintenance makes a connection unavoidable, it urges operators to place at least a virtual private network (VPN) in front of the device. According to current information, nobody knows of active exploitation so far.
A successful compromise could let attackers load malware onto the devices and render them unusable, and an outage would probably last a long time. The BSI also corrected its notice: version 5.4.0 from November 2026 was first described as unaffected, but that cannot currently be ruled out.
Why refrigeration systems on the internet are a risk
Controllers such as these were designed to regulate temperatures reliably, and many were built with little thought for hostile networks. Once a device is reachable from the internet, anyone can probe it, and automated scans find exposed devices quickly. A known flaw then turns a convenient remote access into an entry point.
The consequences are physical. A failed controller can mean spoiled food, interrupted cold chains in logistics or halted production. Because replacement or recovery may take a long time, as the BSI notes, the damage often exceeds the cost of the device itself.
Food retailers, wholesalers, cold storage operators and manufacturers with process cooling are all affected. The people involved are usually facility managers, service providers and IT leads, and responsibility between them is often unclear.
How to secure networked controllers in practice
- Build an inventory of all control devices, including type, firmware version, location and who maintains them.
- Check whether any device is reachable from the internet, for example through port forwarding on the router or a mobile modem installed by a service company.
- Remove direct internet access. If remote maintenance is needed, route it through a VPN with individual accounts and multi-factor authentication.
- Place control devices in their own network segment, separated from office IT by a firewall that allows only the required connections.
- Change default passwords and disable services you do not use.
- Ask the manufacturer or maintenance partner which firmware is safe, and apply updates once confirmed. Given the BSI correction on version 5.4.0, check the advisory again before relying on any version.
- Define an emergency plan, including manual temperature monitoring and a contact for a quick device replacement.
Agree with external service companies in writing who may connect, when, and how access is logged and switched off again. Without that agreement, a forgotten modem or a shared password can undo every other measure on the list.
Which IT security duties apply
No single rule covers every company. The NIS2 directive, implemented in Germany through national law, requires operators in covered sectors to take appropriate risk management measures, and food production and logistics can fall under it depending on size and activity. Whether your company is in scope is a question to clarify with a specialist adviser.
Art. 32 GDPR also requires appropriate technical and organisational measures where personal data is processed, which can include data from access systems or monitoring tied to staff. Contracts with customers and insurers often contain their own security requirements, and a documented network separation helps to show that you acted carefully.
A works council (Betriebsrat) may also have a say where monitoring of employees is possible.
Keeping security documents easy to find
When a warning like this arrives, the first hours go on searching: which controllers do we have, which firmware, who is the service contact, where is the network plan. Inventories, maintenance contracts, manuals and emergency plans often sit on file servers, in mailboxes and in team chats.
Companies can collect these items in one place and give the right people access. A tool that searches company documents and shows the source of each answer saves time in such situations. Staff still need to check the cited document, because the decision stays with people. For the wider security approach behind such a setup, see our security page.
souveraen.ai is an AI platform for company knowledge by clouditiv GmbH in Auerbach, Germany. It answers questions from connected sources such as SharePoint, file servers, Nextcloud and mailboxes, read-only and with existing permissions, and names the document, version and page for each answer. See the answers with sources page for details.
It runs either hosted in Germany or on-premise in your own network, and the on-premise options include Private Spark and an Air-Gap Enterprise variant without any outside connection. Industrial companies can read more on the manufacturing page.
Sources
- Angriffe auf Kühlgeräte: Weitere Schwachstellen in Danfoss Controller AK-SM800A, Bundesamt für Sicherheit in der Informationstechnik


